DeskPi KL-P24 Micro HDMI to HDMI Adapter Board (DP-0036)
SKUDP-0036
Compatible BoardsRaspberry Pi 5 / Raspberry Pi 4B
Video ConnectionMicro HDMI to Standard HDMI
Power ConnectionUSB-C Extension
Description
The DeskPi KL-P24 (DP-0036) is a Raspberry Pi 5 / Raspberry Pi 4B adapter board that extends USB-C power and converts Micro HDMI to standard HDMI for cleaner rear-panel cable routing in RackMate installations. Use the onboard selector for the installed Pi model; HDMI 2.0 is supported.
Key Features
- Rear-Panel Extension: Brings USB-C power and standard HDMI connections toward the rear of a RackMate installation.
- Pi 5 / Pi 4B Support: Onboard selector matches the adapter to the installed Raspberry Pi model.
- HDMI 2.0: Converts Micro HDMI to standard HDMI and supports HDMI 2.0 video connections.
Technical Specifications
| Specification | Details |
|---|---|
| Model SKU | DP-0036 |
| Product Name | DeskPi KL-P24 Micro HDMI to HDMI Adapter Board |
| Compatibility | Raspberry Pi 5 / Raspberry Pi 4B |
| Power Interface | USB-C |
| Video Input | Micro HDMI |
| Video Output | Standard HDMI |
| Video Support | HDMI 2.0 |
| Mode Selection | Raspberry Pi 5 / Raspberry Pi 4B |
| Overall Size Shown | 81.5 mm × 38 mm (3.21 × 1.50 in) |
| Board Body Size Shown | 78.5 mm × 34.5 mm (3.09 × 1.36 in) |
| Board Thickness Shown | 3.60 mm (0.14 in) |
| Mounting Hole Diameter Shown | 2.70 mm (0.12 in) |
| Mounting Hole Spacing Shown | 17 mm (0.67 in) |
Installation Guide
Selecting the Raspberry Pi Mode
- Identify the
RPI Selswitch on the adapter board. - Set the switch to the Raspberry Pi 5 or Raspberry Pi 4 position that matches the board being installed.
- Align the adapter board with the Raspberry Pi connectors before securing the assembly.
The installation graphic shows M2.5 standoffs and M2.5 screws used to secure the adapter board in a multi-board mounting setup.
Connecting the Adapter Board
- Connect the adapter board to the Raspberry Pi's Micro HDMI and USB-C power connections.
- Route the standard HDMI and USB-C connections toward the rear of the RackMate installation.
- Connect a standard HDMI cable and the appropriate USB-C power cable after confirming the mode switch position.
Connection layout shown with a Raspberry Pi 5.
Gallery
